Description
Discontinued, we are looking for a better solution
Ford E-Series 2 inch Front & Rear lift kit 2wd
The e250 e350 lift kits are now available at Country Offroad
Product Description – Complete Front and Rear Kit for 2″ of Lift.
This is a E250 E350 2WD SUSPENSION LIFT that is super heavy duty and designed for heavy duty diesel applications. This kit WILL also work on gasoline powered Econoline. Don’t settle for a kit that will not support the weight of your diesel engine. And beware of kits that “look” the same, but are not the correct diameter for the varying coil spring sizes used on the various builds of the E-250 and E-350 vehicles.
IMPORTANT NOTE: Correct Year Selection is CRITICAL at checkout, because there are 9 different kit variations for the years ranging from 1992-2015. Be sure you get the correct kit by verifying and providing your vehicle Year Model & Vehicle Identification Number Below:
**INSTALLATION INSTRUCTIONS**
1. Raise the front of the vehicle and support the frame so that the front tires just touch the ground. Remove the front tires.
2. Remove the lower shock bolts and the sway bar end link attaching points.
3. Remove the upper and lower coil spring clamp bolt and nut with washer. See images.
4. Force the axle half down so that the coil spring comes loose.
5. Remove the coil spring and the coil spring rubber isolator. See images.
6. Install the Stud Extensions (if needed) onto the lower coil stud, and install the coil spring spacer onto the pad. (If required, cut the factory stud so that the top of the stud extender is flush with the top of the new coil spacer). See images.
7. Install the coil spring onto the coil spring spacer and then into the frame. You may have to use a coil spring compressor.
8. Install the upper and lower coil spring clamp bolt and nut with washer. Make sure that the coil spring is seated correctly into the upper frame. See images.
9. Reconnect the sway bar end link attaching points and the shock nuts.
10. Torque all bolts and nuts to factory specifications. Re-torque all bolts and nuts after 50 miles.
11. Install the front tires and remove the jack stands. Lower the vehicle onto the ground. Aim the headlamps.
12. It is recommended that you have a front-end alignment.
Not the Lift kit you’re looking for? Don’t worry we have more!
Ford E-Series | Class C RV 2‘’ Suspension Lift Kit
Ford E-Series 3’’ Suspension Lift Kit – up to 31″ Tires
Ford E-Series Rear Leaf Spring Suspension 2″ Lift Blocks
In and outbound links
We Do Installs in Portland, Oregon.
To Schedule with us today, CLICK HERE
Would you like to learn more about our parent company Northwest Overland a one stop shop for all your van conversion needs?
To Schedule with our parent company, CLICK HERE
Thank you for choosing Country Offroad!
