Description
Subaru Legacy Suspension Parts Coilovers [GR Lite] 1995-2009 | 2010-2014 | 2015-2019 | 2020-2024
These Subaru Legacy suspension parts: Coilovers [GR Lite] are the perfect addition for your legacy suspension upgrade.
Subaru Legacy Light Duty Offroad Suspension Specifications:
- Designed for light duty offroad
- Optimized for 2″ lift (lifts up to 3″)
- 2 Front Assemblies
- 2 Rear Assemblies
- Subframe spacers included (10-Up only)
- Upright shocks
- Subaru Legacy Radial bearing on Front Assembly
- Subaru Legacy Linear Rate Springs
- 8” front travel
- 8” rear travel
- Highly Polished Electro-Plated Nickel Cartridge
- Rebuildable Shock for Subaru Legacy
- Subaru Legacy Linear rate piston
- Stainless Steel Shims
- Light Weight Synthetic Shock Oil
- Rebound Adjustable : 20 pts
- Rubber bushing rear upper mounts
- Brackets for Sensor Lines on shock body
- Individual Parts Available
Products Current Turnaround Time:
Approx 2wks to hand assemble and ship
Which top mount should you pick for your Flatout Adjustable Suspension Coilovers Subaru?
Camber Plate:
This one is pretty obvious. It combines a spherical bearing (AKA pillowball), attached to an aluminum top plate with slots that allow you to change the angle of the strut assembly.
Spherical Bearing:
This is like a camber plate, however it is usually found on cars with a-arm suspensions (Miata for instance). Is it a fixed position and connects the suspension directly to the chassis and allows for a greater degree of flex.
OEM Hybrid: (RECOMMENDED FOR GR MODELS)
This is designed to be as close to an OEM mount as possible. Inside the mount is a radial bearing which allows the suspension to rotate with no resistance. It has a rubber bushing tying the strut/ shock to the chassis which greatly reduces any noise or vibration.
Offset Spherical Bearing:
This one is available exclusively for our Subaru lift suspensions (GR Lite only). It is exactly like the spherical bearing upper mount, however the center point has been offset to give you -0.5* of camber at 2″ of lift. It’s primarily to give you a proper alignment with no weak spots that a camber plate could give due to the slotted area allowing multiple positions. *We are no longer offering the Offset Spherical on the GR Plus and GR 40 due to increased caster angles putting lateral stress on the assembly.*
How to install your Subaru Legacy Suspension part.
We Do Installs in Portland, Oregon.
To Schedule with us today, CLICK HERE
Would you like to learn more about our parent company Northwest Overland a one stop shop for all your van conversion needs?
To Schedule with our parent company, CLICK HERE
Are you working on your car to resell it?
Certified Pre-Owned Vehicle Inspection Checklist For Subaru
Thank you for choosing Country Offroad!
